Placeholder

NETW 420 DeVry Complete Lab and Bi-Weekly Reports

$165.00

Quantity:

Product Description

NETW 420 DeVry Complete Lab and Bi-Weekly Reports

NETW 420 DeVry Complete Lab and Bi-Weekly Reports

NETW420

 

NETW 420 DeVry Week 2 iLab Latest 

PRTG Network Monitor Installation Lab

Scenario/Summary

The objective of this lab is to install PRTG Network Monitor. A Network Management System (NMS) tool that allows tracking, an storing critical performance information from network devices, including router, switch, client and server, in a LAN. PRTG will be used in the other course labs to setup sensors and traps remotely through SNMP.

Deliverables

NOTE Submit your assignment to the Dropbox, located at the top of this page. For instructions on how to use the Dropbox, read these .equella.ecollege.com/file/8ff9f27a-3772-48cf-9855-4bec4e6706bf/1/Dropbox.html”>step-by-step instructions.

(See the Syllabus section “Due Dates for Assignments & Exams” for due dates.)

You will be saving screenshots of various parts of the lab and answering the questions outlined in the lab instruction sheet available to download at Skillsoft lab environment.

Your deliverable is a lab report, completed in Microsoft Word. It will include screenshots and answers to the questions outlined in the instruction sheet. It has two parts that are required for full credit. The first part has questions and requires the accompanying screenshots, and the second part requires a summary and conclusion based on your results. This is the same format you have seen each week in the iLabs. A template for the deliverable is available for downloading in DocSharing.

When you complete the lab for Week 2, place your Microsoft Word document into the Dropbox.

Required Software

.next.ecollege.com/default/launch.ed?ssoType=DVUHubSSO2&node=skillSoftSSO&orgCode=org_29″>Connect to the iLab here

Lab Steps

STEP 1: Download Lab Instructions

Access to the Skillsoft lab to download the PRTG Network Monitor Installation Lab instructions sheet. The detailed lab instructions are written in pdf file format (.pdf) for easy downloading. The instruction sheet includes screenshots and step-by-step instructions.

STEP 2: Complete Lab Activity

Walk through the PRTG Network Monitor Installation instruction sheet; write a lab report using lab report template available in DocSharing. Include screenshots where appropriate in the lab report, and answer the questions in the lab instruction.

TIP: From seeing the experience of former students, it is best to follow each step in the lab precisely to arrive at the correct results. (Because you pull up configuration menus that involve the selection of various parameters, if a parameter setting is skipped, the answer will be incorrect.)

STEP 3: Submit Your Deliverable

Complete the iLab for this week.

Submit your lab to the Dropbox, located at the top of this page. For instructions on how to use the Dropbox, read these .equella.ecollege.com/file/8ff9f27a-3772-48cf-9855-4bec4e6706bf/1/Dropbox.html”>step-by-step instructions.

See the Syllabus section “Due Dates for Assignments & Exams” for due date information.

NETW 420 DeVry Week 4 iLab Latest 

Discovering network devices with PRTG Network Monitor

Scenario/Summary

The objective of this lab is to perform network device discovering using the PRTG Network Monitor tool, which was installed in the previous lab. The network devices are in a local area network, and consist of a router, a switch, two clients (Windows and Linux), a Linux Server, and the Manager PC where PRTG is installed. Discovering network devices includes add and configure sensors, as well as delete unused sensors because the tool has a limit of monitoring up to 30 sensors.

Deliverables

NOTE Submit your assignment to the Dropbox, located at the top of this page. For instructions on how to use the Dropbox, read these .equella.ecollege.com/file/8ff9f27a-3772-48cf-9855-4bec4e6706bf/1/Dropbox.html”>step-by-step instructions.

(See the Syllabus section “Due Dates for Assignments & Exams” for due dates.)

You will be saving screenshots of various parts of the lab and answering the questions outlined in the lab instruction sheet available to download at Skillsoft lab environment.

Your deliverable is a lab report, completed in Microsoft Word. It will include screenshots and answers to the questions outlined in the instruction sheet. It has two parts that are required for full credit. The first part has questions and requires the accompanying screenshots, and the second part requires a summary and conclusion based on your results. This is the same format you have seen each week in the iLabs. A template for the deliverable is available for downloading in DocSharing.

When you complete the iLab for Week 4, place your Microsoft Word document into the Dropbox.

Required Software

.next.ecollege.com/default/launch.ed?ssoType=DVUHubSSO2&node=skillSoftSSO&orgCode=org_29″>Connect to the iLab here

Lab Steps

STEP 1: Download Lab Instructions

Discovering network devices with PRTG Lab instructions sheet is accessible for you at Skillsoft. The detailed lab instructions are written in pdf file format (.pdf) for easy downloading. The instruction sheet includes screenshots and step-by-step instructions.

STEP 2: Complete Lab Activity

Walk through the lab instruction sheet, make a lab report with screenshots along the way, answer the questions, and write up the summary. Place all of this in a Word document, and include all required sections in one deliverable document. Make sure you complete all the sections in the lab report template, because this impacts your overall lab grade. The lab report template file is available for downloading at DocSharing.

TIP: From seeing the experiences of former students, I’ve seen that it is best to follow each step in the lab precisely to arrive at the correct results.

STEP 3: Submit Your Deliverables

Complete the iLab for this week.

Submit your assignment to the Dropbox, located at the top of this page. For instructions on how to use the Dropbox, read these .equella.ecollege.com/file/8ff9f27a-3772-48cf-9855-4bec4e6706bf/1/Dropbox.html”>step-by-step instructions.

See the Syllabus section “Due Dates for Assignments & Exams” for due date information.

NETW 420 DeVry Week 6 iLab Latest 

Configuring traps in SNMP agents with PRTG Network Monitor

iLab Overview

Scenario/Summary

This week’s lab provides a framework to monitoring and configuring traps in network devices discovered in the previous lab. Specifically, network alarms are configuring in a switch port load, a web server, and a disable router port. You will configure PRTG Network Monitor to achieve these goals. Pay special attention to lab instructions to complete the lab successfully.

This lab uses PRTG Network Monitor in the Skillsoft environment.

Deliverables

(See the Syllabus section “Due Dates for Assignments & Exams” for due dates.)

You will be saving screenshots of various parts of the lab and answering the questions outlined in the lab instruction sheet available to download at Skillsoft lab environment.

Your deliverable is a lab report, completed in Microsoft Word. It will include screenshots and answers to the questions outlined in the instruction sheet. It has two parts that are required for full credit. The first part has questions and requires the accompanying screenshots, and the second part requires a summary and conclusion based on your results.

NETW 420 DeVry Week 1 Bi-Weekly Project Latest 

equella.ecollege.com/file/5c41673b-8164-47ee-bba7-464b2d67c509/2/NETW420_W1_CourseProject.html”>Course Project> Guidelines

Bi-Weekly Project: Week 1

Objectives

During this course, you will be introduced to a variety of Network Management topics, all of which you will encounter again and again here at DeVry and in your professional career.

In this week, you will prepare a research report in which you will summarize and present what you have learned this week in your Introduction. Each exercise must be completed on a separate page of your report.

Guidelines

This week, you will prepare a research report that thoroughly answers the following two exercise questions.

1. Exercise 3 of Chapter 1 on page 49:

Draw the route diagram (Something similar to Figure 1.2 on page 8) identifying each node for the following data that was obtained using a trace routing tool. What is the average time a packet takes to travel from noc2 host to netman host?

noc2% traceroute netman.cc.gatech.edu

traceroute to netman.cc.gatech.edu (130.207.8.31), 30 hops max, 40 byte packets

main-rtr.gcatt.gatech.edu (199.77.147.1) 1.045 ms 1.012 ms 0.971 ms.

130.207.251.2 (130.207.251.2) 2.198 ms 1.404 ms 1.837 ms.

netman.cc.gatech.edu (130.207.8.31) 3.528 ms 1.671 ms 1.602 ms.

2. Exercise 18 of Chapter 1 on page 51:

As a network engineer in a Network Operations Center, you are following up on two trouble tickets. You do not have a network management system and you have to use the basic network tools to validate the problem before you can resolve them. Please explain what tools you would use in each case and how it would validate the customer complaint

(a) Trouble Ticket 100: Customer says that when he receives messages, the message is periodically missing some characters.

(b) Trouble Ticket 101: Customer in Atlanta complains that when she tries to log into the system server.headquarters.com in New York, she gets disconnected with a time-out. However, her colleague in her New York office reports that he is able to access the system.

The Project Report template link can be found on the Assignments page. The report should be at least two pages long of text (pictures are additional), font size 12, and double spaced. Your report should follow this format. Below is the grading rubric for the Week 1 Paper.

NETW 420 DeVry Week 3 Bi-Weekly Project Latest 

Objectives

During this course, you will be introduced to a variety of Network Management topics, all of which you will encounter again and again here at DeVry and in your professional career.

In this week, you will prepare a research report in which you will summarize and present what you have learned about the Management Information Base (RFC 1213).

Guidelines

This week, you will prepare a research report summarizing the key components of the MIB. Be sure to discuss how the MIB is currently used, its importance to SNMP, and future trends.

The Project report template link can be found on the Assignments page. Your report should follow its format. Below is the grading rubric for the Week 3 Paper.

NETW 420 DeVry Week 5 Bi-Weekly Project Latest 

Objectives

During this course, you will be introduced to a variety of Network Management topics, all of which you will encounter again and again here at DeVry and in your professional career.

In this week, you will prepare a research report in which you will summarize and present what you have learned about Network Management Systems (NMS), and their network monitoring capability.

Guidelines

This week, you will prepare a research report summarizing the capability and features of three well-known NMSs.

  1. PRTG Network Monitoring .paessler.com/prtg”>http://www.paessler.com/prtg
  2. Solarwinds Network Performance Monitoring .solarwinds.com/network-performance-monitor.aspx”>http://www.solarwinds.com/network-performance-monitor.aspx
  3. Open NMS .opennms.org/”>http://www.opennms.org/

The paper should compare and contrast the following features in each NMS product.

  • Type of network to manage
  • Remote monitoring features Network
  • scalability support
  • Data collection and statistics
  • Technical support

The Project Report template link can be found on the Assignment page. The report should be at least two pages long of text (pictures are additional), font size 12, and double spaced. Your report should follow this format. Below is the grading rubric for the Week 5 Paper.

NETW 420 DeVry Week 7 Bi-Weekly Project Latest 

Objectives

During this course, you will be introduced to a variety of Network Management topics, all of which you will encounter again and again here at DeVry and in your professional career.

In this week, you will prepare a research report in which you will summarize and present what you have learned this week in your Introduction. Each exercise must be completed on a separate page of your report.

Guidelines

This week, you will prepare a research report that thoroughly answers the following three exercise questions. Each exercise should be prepared on a separate page of your report.

  1. Exercise 10 of Chapter 12 on page 505: The network shown in Figure 12.44 on page 506 is an MPLS network with all routers configured as Label-Switching Routers (LSRs). The paths (LSPs) are determined using TE (Traffic Engineering). The address of each router is x.x.x.x where x is the router number, for example, 1.1.1.1. Explain your reasoning and fill in the R2 routing table: .solarwinds.com/network-performance-monitor.aspx”>
    1. for paths with no tunnels and
    2. for paths with tunnels T1 and T2.
  2. Exercise 6 of Chapter 13 on page 553: Cable modems on the coaxial part of the topology of an HFC configuration shown in Figure 13.3 on page 510 are a tree structure. Cable modems with Ethernet stations resemble an Ethernet LAN. Contrast an HFC coaxial broadband LAN with a regular Ethernet LAN on: (a) topology, (b) downstream protocol, and (c) upstream protocol.
  3. Exercise 6 of Chapter 14 on page 582:
    1. What MIB table would you use to measure the QoS of service flow in a fixed wireless system between the base station and the subscriber station?
    2. Define latency and jitter for service flow in a fixed wireless system.
    3. Write the specific managed objects associated with latency and jitter.

The Project Report template link can be found on the Assignments page. The report should be at least two pages long of text (pictures are additional), font size 12, and double spaced. Your report should follow this format. Below is the grading rubric for the Week 7 Paper.

Solutions

There are no reviews yet.

Add your review